|
| |
 |
 |
|
|
| Teflon Hose |
|
|
SHIP TO SHORE STEAM HOSE
250 PSI 388
Horizontal Braided
Application: For temporary steam service from docks or barges to ships. Lighter weight and more flexibility than metal lined steam hose. Closed fiberglass braid in bore of hose to prevent rubber particles from entering steam line and shipboard equipment. Heat resistant tube reinforced with two high tensile wire braids and an open weave textile breaker braid. Cover compounded to resist heat, abrasion, and ozone. Maximum length: 50 ft.
STEAM HOSE, HELIX-REINFORCED
A multipurpose steam and hot water hose with asbestos tube for various applications in industry and automobile engineering. Temperature range: -35C up to +190C saturated steam. This type of hose is also available with external asbestos layer and external helix.
FLEX-VAC SUCTION HOSE
Excavation and construction
Sanitary-Cesspool to Truck
Flexible enough to tie a knot.
Meets the demands of industry, it is tough and rugged, lightweight, extremely flexible. Even in winter weather crush-proof, kink-proof, collapse-proof.
RCA IRRIGATION HOSE
High Tensile Strength: 7 tons
Working Pressure: 150 PSI
Burst: 500 PSI
Wt./Ft.: 1 lb
4" ID, 660"
50 ft. lengths available
990" continuous lengths available-all sizes-prices on request
Excellent for self-propelled continuous-moving automated systems for irrigating steep and rough ground. Low weight, flexible, non-snaking, highly abrasion resistant polyurethane cover. Polyester reinforcements for easy coiling; oil and weather resistance. We have a complete repair shop for all types, sizes of any manufacturers irrigation hose.
SUCTION BOX
For vacuum lines to remove water. Also acts as a flexible unit to absorb oscillation of table in Fourdrinier papermaking machine.
RCA POTABLE WATER HOSE
Use: Conveying potable water, suction and discharge.
Tube: Highest quality made from FDA approved materials.
Carcass: Nylon cord - wire supported.
Cover: Smooth, - oil, ozone and abrasion resistant.
ASBESTOS COVERED FURNACE DOOR HOSE
Application: Used as a flexible water connection to transport water to and from water-cooled, open-hearth furnace doors.
Construction: Wrapped without wire.
Reinforcement: Multiple piles of hose fabric (square woven) covered with two piles of heavy asbestos fabric that has been impregnated with Neoprene friction material.
TRANSFER HOSE
All Stainless Steel
Flexible Dry Bulk Materials Pneumatic
Utilizing smooth bore construction to insure
Original purity of product transferred
Lower transfer energy needs than with other hose types
Long hose service life due to its heavy-duty abrasion resistant liner
A truly all-weather hose immune from contamination, aging, and environmental problems
AIR BRAKE, HOSE, TYPE B
2 Braid 900 lb. Burst
Molded Type B, DOT specifications, meets S.A.E. J1402. Approved by American Association of Motor Vehicle Administrators. Highly flexible non-kinking construction that will give excellent service life even under exceptionally adverse operation conditions.
Cover: Black, abrasion, weather and oil resistant neoprene.
Reinforcement: Tyrex cord.
Tube: Black, Nitrile (Buna N) Synthetic rubber
GARAGE EXHAUST HOSE
20 ft continuous lengths of tubing with highest heat resistance of any crushproof-type tubing available. Over 500 degrees for 1-1/2" and larger sizes.
Ideal for overhead systems
New patented process eliminates or reduces need for connectors
Made in 2-1/2", 3", and 4" I.D., the most popular sizes
Under floor and overhead garage systems to exhaust carbon monoxide fumes.
SEWER CLEANING HOSE
High-pressure performance
This special sewer cleaning hose will withstand working pressure up to 2000 phi in the full one-inch sizethe normal water pressure required to propel the jet nozzle through a sewer.
AIR HOSE-OIL RESISTANT
Recommended Service: For industrial installations and paint spray equipment where resistance to entrained oil and external oil contamination is essential. Also recommended as a fluid hose for water-based materials.
Tube: Nitrile rubber (Buna-N)
Carcass: High tensile rayon braid reinforcement
Jacket: Neoprene, Red, Smooth
Connections: Reusable - plated brass.
HOT HOSE
Specially designed and custom made heated hoses to meet customer specifications and requirements. Conveys water and other materials while maintaining at required temperature levels.
Operation voltages: 0 to 220, AC or DC
Watt density: Up to 50 watts per lineal foot
Construction: Hose Liner: E.P.R. Synthetic Rubber Jacket: Fiberglass reinforced Neoprene or Silicone Rubber
Abrasion resistance: Jacket is resistant to Abrasion, dragging, crushing, scuffing and will not kink or be damaged by Automotive Traffic
Controls: Can be manufactured with thermostat temp. controls. Preset to desired temperature.
Chemical Resistance: Tube resistant to Alkalies, Acids such as Hydrochloric Acid, Formaldehyde Sodium Hydroxide, Sulphuric Acid, Glacial Acetic Acid, Ether.
Pressures: Withstands 200 PSI and operating pressure of 75 PSIG or more.
Fittings: Supplied with or without fittings.
Length 8 sizes: up to 50 ft. long and 1" ID
TWIN HOSES
Any hoses, whatever is their diameter, but of same material cover, can be delivered in twin line construction. Therefore, sizes and types combinations are possible. Separation of hose ends is easy with a cutting tool for coupling preparation.
ASBESTOS COVERED WATERHOSE
Application: Non-metallic furnace door hose - Designed to resist sparks and flames in industrial use and also utilized as a coolant hose.
Construction:
Tube: Quality rubber tube, resistant to water absorption.
Reinforcement: Piles of strong medium weight cotton fabric.
Cover: Heat resistant with either one of more piles of frictioned asbestos fabric.
Maximum Length: 50 ft. |
|
 |
| HOME | CATALOG | HOSE | TUBING | MATTING | O-RINGS | BELTING | RUBBER SHEETING | RUBBER SPECIALTIES | EXPANSION JOINTS | ALUMINUM CASTINGS | FLEXIBLE METAL HOSE | OTHER PRODUCTS | CONTACT US |
|
| |
