SAE 100 R9R
Oil resistant synthetic rubber tube
Four spiral layers of high tensile steel wire
Oil and abrasion resistant synthetic rubber cover
Lengths up to 59ft
-40 degrees F to + 200 degrees F

SAE 100 R10
Oil resistant synthetic rubber tube
Four spiral layers of high tensile steel wire
Oil and abrasion resistant synthetic rubber cover
Lengths up to 59ft
-40 degrees F to + 200 degrees F

SAE 100 R11
Oil resistant synthetic rubber tube
Six spiral layers of high tensile steel wire
Oil and abrasion resistant synthetic rubber cover
Lengths up to 60ft
-40 degrees F to + 200 degrees F

Hydraulic hoses - super high pressure
2-1/2"ID
Hose OD 3.70, bend radius 28, Min burst pressure 8700, max working pressure (static) 2900, max working pressure (dynamic) 2175,
proof pressure 4350, approx. weight 6.24 lbs/ft, standard length 30 ft.

Hydraulic hoses - high pressure
Seamless synthetic rubber tube
Four plies of spiral super high tensile wire reinforcement separated by rubber insulation layers.
Synthetic rubber cover.

Sand suction hose
Tube: 3/8" thick natural rubber
reinforced by multiple plies of of woven fabric with a fully embedded steel wire helix.
Top quality rubber cover resistant to abrasion and weather.

Material handling hose
For non oily, dry flowable material like cement.
Smooth abrasive resistant rubber tube - 1/8"
Wrapped plies and spiraled wire
Black abrasive resistant rubber cover

Material handling hose
For sugar, syrup, silica sand, wheat and other non oily materials.
Meets FDA requirements 
Smooth white rubber tube - 3/16"
Wrapped plies and spiraled wire
Natural rubber cover

Sand discharge Hose and sleeve
Used to convey wet or dry sand or heavy gravel under pressure. Heavy duty abrasion resistant tube construction for high strength and long wear.

Heavy duty dredge sleeves
3/8" think natural rubber compounded for maximum abrasion resistance. With multiple plies of rubber impregnated fabric for reinforcement. The cover is 3/32" thick, synthetic rubber for excellent resistance to abrasion and weathering with and extra fabric over the cover at each end of the sleeve for increased strength in the clamping area

Sand suction hose
Allows smooth water ways, abrasive tube and cover and wire reinforced. Enlarged ends fit over standard pipe and prevent obstruction.

Sand blast hose
Static conductive tube. High quality, economical hose for blasting with sand , steel shot or other abrasive material. Ideal where flexibility is important.

Shot blast vacuum hose
Light weight flexible hose for return liners in salvaging shot and sand in sand-blasting operations. Abrasion resistant static conducting tube 1/8" wrapped ply and spiral wire.

CELLOFLEX TRANS-CHEM FLEXHOSE
Extremely flexible - Lightweight
1. Polypropylene coated steel internal wire spiral
2. Polypropylene inner textile layer
3. Polyethylene tube
4. Textile reinforcement
5. Galvanized steel external wire spiral
6. PVC coated outer textile cover

TEFLON HOSE ASSEMBLIES
Stainless steel and bronze braided Teflon hose assemblies with permanent fittings

SOLVENT TRANSFER HOSE
THIOKOL TUBE
Extra Flexible
Lightweight
Crush proof
For unloading a wide variety of chemicals and solvents from storage tanks and tank trucks. Construction: Smooth, chemical-resistant Thiokol tube, reinforced with a spiral cord and fabric piles.